Toggle Nav
Blichmann AutoSparge for BoilerMaker Pots
$70.00
Drop Ship Item
SKU
EQP3120C
This item is drop shipped
This item qualifies for super saver shipping
This item is special order
This item qualifies for free shipping
Blichmann AutoSparge for BoilerMaker Pots is available to buy in increments of 1
Have you longed for a sparging system with a `set-it-and-forget-it` design? The elegantly simple construction of Blichmann Engineering`s AutoSpargeª automatically sets the hot liquor flow rate and liquid level in your mash / lauter tun. As you change the sparge rate into your boil kettle the AutoSpargeª automatically responds by increasing or decreasing hot liquor flow to compensate and keeps a constant level in your tun.
The AutoSpargeª is an awesome accessory for RIMS systems and it also works great with gravity systems or with pumps! Wort gently rotates on top of the grain bed to reduce channeling and oxygen pick-up and to increase extraction efficiency. With a constant hot liquor level over your grain bed complicated rotating sparge arms are unnecessary complications!
- Stainless steel float ball and rod.
- Low-lead surface-treated brass valve body.
- Includes 18` silicone hose and stainless steel hose float.
- Fits any pot larger than 12` in diameter including converted kegs.
- Adaptable to coolers. See the Installation tab for details.
- Requires a 13/16 mounting hole. See the Installation tab for details.
- Six optional locations for a punched mounting hole in your BoilerMakerª pot for a nominal fee. Must be ordered with your BoilerMakerª pot. Click the BoilerMakerª Installation tab above for ordering details!
Have you longed for a sparging system with a `set-it-and-forget-it` design? The elegantly simple construction of Blichmann Engineering`s AutoSpargeª automatically sets the hot liquor flow rate and liquid level in your mash / lauter tun. As you change the sparge rate into your boil kettle the AutoSpargeª automatically responds by increasing or decreasing hot liquor flow to compensate and keeps a constant level in your tun.
The AutoSpargeª is an awesome accessory for RIMS systems and it also works great with gravity systems or with pumps! Wort gently rotates on top of the grain bed to reduce channeling and oxygen pick-up and to increase extraction efficiency. With a constant hot liquor level over your grain bed complicated rotating sparge arms are unnecessary complications!
- Stainless steel float ball and rod.
- Low-lead surface-treated brass valve body.
- Includes 18` silicone hose and stainless steel hose float.
- Fits any pot larger than 12` in diameter including converted kegs.
- Adaptable to coolers. See the Installation tab for details.
- Requires a 13/16 mounting hole. See the Installation tab for details.
- Six optional locations for a punched mounting hole in your BoilerMakerª pot for a nominal fee. Must be ordered with your BoilerMakerª pot. Click the BoilerMakerª Installation tab above for ordering details!
Have you longed for a sparging system with a `set-it-and-forget-it` design? The elegantly simple construction of Blichmann Engineering`s AutoSpargeª automatically sets the hot liquor flow rate and liquid level in your mash / lauter tun. As you change the sparge rate into your boil kettle the AutoSpargeª automatically responds by increasing or decreasing hot liquor flow to compensate and keeps a constant level in your tun.
The AutoSpargeª is an awesome accessory for RIMS systems and it also works great with gravity systems or with pumps! Wort gently rotates on top of the grain bed to reduce channeling and oxygen pick-up and to increase extraction efficiency. With a constant hot liquor level over your grain bed complicated rotating sparge arms are unnecessary complications!
- Stainless steel float ball and rod.
- Low-lead surface-treated brass valve body.
- Includes 18` silicone hose and stainless steel hose float.
- Fits any pot larger than 12` in diameter including converted kegs.
- Adaptable to coolers. See the Installation tab for details.
- Requires a 13/16 mounting hole. See the Installation tab for details.
- Six optional locations for a punched mounting hole in your BoilerMakerª pot for a nominal fee. Must be ordered with your BoilerMakerª pot. Click the BoilerMakerª Installation tab above for ordering details!
Have you longed for a sparging system with a `set-it-and-forget-it` design? The elegantly simple construction of Blichmann Engineering`s AutoSpargeª automatically sets the hot liquor flow rate and liquid level in your mash / lauter tun. As you change the sparge rate into your boil kettle the AutoSpargeª automatically responds by increasing or decreasing hot liquor flow to compensate and keeps a constant level in your tun.
The AutoSpargeª is an awesome accessory for RIMS systems and it also works great with gravity systems or with pumps! Wort gently rotates on top of the grain bed to reduce channeling and oxygen pick-up and to increase extraction efficiency. With a constant hot liquor level over your grain bed complicated rotating sparge arms are unnecessary complications!
Stainless steel float ball and rod.
Low-lead surface-treated brass valve body.
Includes 18` silicone hose and stainless steel hose float.
Fits any pot larger than 12` in diameter including converted kegs.
Adaptable to coolers.
Requires a 13/16 mounting hole.
Six optional locations for a punched mounting hole in your BoilerMakerª. Must be ordered with your BoilerMakerª pot. See BoilerMakerª Brew Pots for locations.
This is a special order item and will ship directly from the manufacturer.
| Drop Shipped | Yes |
|---|---|
| Freight Shipped | No |
| Special Order | Yes |
| Super Saver Shipping | Yes |
Write Your Own Review